To give your car that perfect visual and performance touch, the engineers at Direnza have created a complete line of wheel spacers. These are designed to give your vehicle a wider, more stable stance quickly and easily. With the correct Direnza spacers installed, your car will take on a more aggressive look with wheels and tyres filling the wheel arch exactly the way they should.
Fine-tuning your track width doesn't just enhance your car's look, it also gives you improved handling, performance and optimised roll capabilities. Direnza spacers are available in a range of sizes, letting you position your tyres exactly where they will look and perform their best. All Direnza spacer kits come complete with all necessary mounting hardware.
The Direnza wheel spacer is one of the easiest and most cost effective bolt-on performance handling enhancements for your vehicle.
Dacia Duster (2010 -)
Fiat Talento (2016 -)
Infiniti EX 25,35,37.30d (2007 -)
Infiniti FX 35,37,45,50 (2003 - 2008)
Infiniti G25 (2010 -)
Infiniti G35 (2003 - 2007)
Infiniti G37 Coupe (2008 -)
Infiniti JX35 (2012 -)
Infiniti M 25,37,56,35h,30d (2010 -)
Infiniti M 35,45 (2003 - 2010)
Infiniti Q45 (2003 - 2008)
Nissan 200sx S14 (1994 - 1998)
Nissan 300zx Z31,Z32 (1989 - 1992)
Nissan 350z (2002 - 2009)
Nissan 370z (2009 -)
Nissan Almera Tino V10 (2000 - 2006)
Nissan Altima (2002 -)
Nissan Cefiro (1995 - 2004)
Nissan e-NV200 (2014 -)
Nissan Fuga (2004 - 2009)
Nissan Fuga (2009 -)
Nissan GT-R Rear (2008 -)
Nissan GT-R Front (2008 -)
Nissan Juke (2010 -)
Nissan Leaf (2010 -)
Nissan Maxima (2004 -)
Nissan Maxima QX (1995 - 2004)
Nissan Murano Z50 (2004 - 2008)
Nissan Murano Z51 (2008 -)
Nissan Primera P12 (2002 - 2006)
Nissan Pulsar (2014 -)
Nissan Qashqai J10 (2007 - 2013)
Nissan Qashqai J11 (2013 -)
Nissan Qashqai Plus 2 J10 (2008 - 2013)
Nissan Quest (2004 -)
Nissan Roque (2007 -)
Nissan Serena 91993 - 2000)
Nissan Skyline R32 (1989 - 1993)
Nissan Skyline R33 (1993 - 1998)
Nissan Skyline R34 (1998 - 2002)
Nissan Teana (2006 - 2008)
Nissan Teana (2008 -)
Nissan X-Trail T30 (2001 - 2007)
Nissan X-Trail T31 (2007 -2014)
Nissan X-Trail T32 (2014 -)
Opel/Vauxhall Vivaro (2014 -)
Renault Clio Sport (2013 -)
Renault Espace (2015 -)
Renault Fluence (2010 -)
Renault Grand Scenic (2009 -)
Renault Kadjar (2015 -)
Renault Koleos (2008 -)
Renault Laguna 3 (2007 - 2015)
Renault Laguna 3 Coupe (2009 - 2015)
Renault Megane (2008 - 2015)
Renault Megane RS (2010 -)
Renault Megane Scenic (2009 -)
Renault Talisman (2015 -)
Renault Trafic (2014 -)
Before purchasing any wheel spacers please measure the gap between the outer edge of the tyre and the wheel arch. Take 5mm from this figure to help give the maximum thickness wheel spacer suitable for your vehicle. It is good practice to work to 5cm less than this figure to allow for movement in the vehicle suspension. When measuring your wheel gap always measure both the driver and passenger sides on the same axle as measurments may differ slightly and you should always work off the smaller of the two figures. This is especially important as spacers which have been fitted and / or tested cannot be returned.
Below you will find a brief glossary of terms you may encounter when checking the suitability of wheel spacers for your vehicle.
PCD stands for 'Pitch Circle Diameter' and is usually expressed in millimeters, (inches may also be used). For a 4 or 6 bolt fitment this measurment is the distance between the centre of two diametrically opposite bolt holes. For 5 bolt fitments measuring the diameter of an imaginary circle running through the centre of each bolt hole.
The offset of a vehicle's wheels is the distance between the centerline of the wheel and the plane of the hub-mounting surface. This is typically expressed in millimetres and can be either positive / negative. The offset plays a significant role in the vehicle's suspension geometry as well as dictating the distance between the tyre and suspension. Not to mention the visual gap between the wheel and the vehicle bodywork.
Stud / Bolt Pattern
The stud / bolt pattern refers to the number of studs, (or lugs) the wheel bolts onto, and the imaginary circle the studs form. Most vehicles have either 4, 5 or 6 bolt patterns.
The centre bore (or hub diameter) of a rim refers to the size of the centre hole in the middle of the wheel. This correlates to the diameter of the hub centre bore and is usually expressed in millimetres.
Hub centric refers to the the the point at which the primary load of the vehicle is placed. Hub centric wheel spacers ensure less load is placed on wheel bearings and other suspension components by keeping this load on the vehicle hub. The alternative is to us 'lug centric' spacers which rely on the wheel studs to centre the wheel on the hub. Good practice for fitting spacers of thicknesses greater than 10mm is to use hub centric wheel spacers.