Nissan S14 200SX SR20DET
Early Zenki Engines
Twin Cam, 16 Valve, Single Turbo
Adjustable Fuel Pressure Regulator / FPR
Genuine Italian Made Malpassi Quality
1:1 Ratio- NOT Rising Rate
Everyone knows how essential it is to get fuelling right on turbocharged cars! So if you are running a tuned S14 SR20 engine you need one of these genuine Italian Malpassi adjustable fuel pressure regulators. Essential where cars are running with aftermarket tuning parts and above stock boost levels.
Genuine Malpassi Fuel Pressure Regulators
Unlike some cheaper regulators these are properly referenced to the manifold pressure. As the manifold pressure changes (vacuum on cruise, higher pressure under boost) the injectors are 'seeing' different pressures, but the ECU fuel maps are configured for a steady state. The vacuum take off means our fuel pressure regulators constantly adjust the fuel pressure to suit the ambient pressure inside the manifold- keeping your chosen fuel pressure secure and accurate.
For those trying to get the most out of their stock injectors but using aftermarket engine management these adjustable fuel pressure regulators mean you can increase the base pressure behind the injectors. This has the same effect as fitting slightly bigger injectors as more fuel is dispensed for each opening of the injector.
Max Flow 5 Ltrs/Min
Adjustable 1.5 Bar (22 Psi) - 6 Bar (90 Psi)
Tested up to 10 Bar
Rate is 1:1 for Turbocharged applications (NOT rising rate)
Referenced to manifold pressure
Don't Forget to Order a Fuel Rail Adaptor
Please note- No fitting instructions are provided- This FPR should be set up professionally with the aid of a rolling road and/or wide band lambda.
Look out for our great value uprated Fuel Filters & Fitting Kits too!!